| | |  | Structured Wiring Components | Home » » » » CHANNEL VISION C-0332 1 In / 16 Out Amplified Rf Splitter | | | | | | | Description: | | 1GHz broadband amplification1dB signal gain per output DC passing on all ports54 - 10,000MHz forward, 5-42MHz return for bi-directional interactive TVUL and CSA approved | | | Features: | |
• 1 dB signal gain per output
• 1 Ghz broadband amplification
• DC passing
• Bi-Directional: 54 - 10,000MHz forward, 5-42MHz return
• UL and CSA approved
| | | Product Details: | | | Product Length:
| 15.5 inches | | Product Width:
| 6.0 inches | | Product Height:
| 2.5 inches | | Product Weight:
| 3.0 pounds | | Package Length:
| 15.5 inches | | Package Width:
| 6.2 inches | | Package Height:
| 2.6 inches | | Package Weight:
| 3.0 pounds | | Average Customer Rating:
|  based on 4 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 4 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
4 of 4 found the following review helpful:
Perfect for the A/V setup I reworked at a local barJul 06, 2010
By J. Mills
I'm going to type one review for three products. I hope that is allowed.
A friend of mine owns the "hippest ultra-chic dive bar" in Mesa, AZ. The A/V system has had many problems for several years. The biggest customer complaint was the snowy picture and lack of clarity across the 8 televisions. Being a dive bar, these were not LCD's or Plasma TV's, all were CRT's. I had a budget of $200. The original setup was for Direct TV, DVD player, VCR and ROKU, an internet TV provider. These were all connected via 2-way coax splitters and two way switches. I removed about two dozen of the switches and splitters along with a couple hundred feet of coax when I started.
The first part of my setup used the Cables To Go 28750 4x2 S-Video + Composite Video + Stereo Audio Selector Switch (Black) (purchased here). This product has 4 inputs with 2 outputs. Though the item doesn't mention it in the description, this switch is capable of converting S-Video to Composite and vice versa. This was handy because some of the source devices only had composite video out and I wanted to use S-Video coming out of the switch. I sent one of the 2 outputs to the A/V receiver, mainly for sound purposes but also to supply a monitor and digital projector.
The other output went to the Belkin RF Modulator ( F8V3063 ) that I purchased here. Since some of the TV's only had coax input and the rest were already wired with coax, converting the A/V signals to coax was the most cost effective distribution method. I would have loved to use RCA audio and S-Video to all available TV's but the cables and additional distribution splitter/amplifier would have exceeded my budget. This RF modulator did the job quite nicely.
From the modulator, the coax goes to the CHANNEL VISION C-0332 1 In / 16 Out Amplified Rf Splitter (also purchased here) and is then sent to the 8 televisions. I also added two additional TV's that are even further away from the splitter than the rest. I installed an "F Type 75 Ohm Terminator, Pkg/10" (purchased elsewhere) on every output that wasn't hooked up to a TV.
With the use of the above products, I was able to achieve crystal clear picture on all of the TV's, even the ones at the end of long runs of coax. I highly recommend any and all of the above items as all have performed flawlessly so far, about a month as of this writing.
Just What We Needed!Nov 28, 2011
By bob swain
I work part time for Habitat for Humanity at the ReStore. We had a TV display that got terriable pictures because it was split a dozen times. We hooked this up and now the pictures look great! Thanks!
works greatMay 20, 2011
By Jeffrey Hutchings
Works as advertised and I am happy with the purchase. I did need to add an additional amplifier to strengthen the signal.
 Superior ConfigurationMay 11, 2009
By moviegeek
The configuration of the Channel Vision C-0332 allows coax cables to be installed in the media panel without any bends as the cables can come straight down onto the connectors. It is compatible with Leviton media panels. The only negative is the amplifier. It does not seem to have the gain to supply each of the the 8 way splitters without some loss of signal. In my panel I had to install another amplifier that has slightly more gain and a better Noise Figure to take the place of the amp that came with the C-0332. If you live in a strong signal area the amplifier furnished with the C-0332 might be adequate.
| | |
|
