| | |  | VHS-C / S-VHS-C | Home » » » » MAXELL VHS-C TO VHS ADAP MECHANICAL | | | | | | | Description: | | MAXELL VHS-C TO VHS ADAP MECHANICAL | | | Features: | |
• Allows VHS-C/SVHS-C playback in VHS/SVHS decks
• Battery operated
| | | Product Details: | | | Product Length:
| 7.5 inches | | Product Width:
| 1.0 inches | | Product Height:
| 4.0 inches | | Product Weight:
| 0.52 pounds | | Package Length:
| 7.6 inches | | Package Width:
| 4.2 inches | | Package Height:
| 1.1 inches | | Package Weight:
| 0.45 pounds | | Average Customer Rating:
|  based on 93 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 93 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
114 of 115 found the following review helpful:
 Important instructions in this reviewJan 23, 2011
By Markm
I don't normally write reviews, although I read a lot of them and find them useful. So I'm writing this just because i read the bad reviews for this product and almost bought the more expensive ones; but decided on this one to save some money. My worry was that to save a few bucks I was risking breaking a tape or a VCR per the other review's comments.
I am pretty sure the reason they had problems is they didn't use it properly. The instructions are pretty bad, and if you don't use it right it will break a tape and/or mess up your VCR. So here is the way to use it;
the instructions just say open the cover, put in the tape, and close the cover; but its a lot more than that.
1. open the cover, and you'll see two posts sticking up that are spring loaded. It is very important you don't do what I did, which was figure those go in front of the tape, so I pushed them open and dropped the tape so the posts were on the outside of the tape. After experimenting and seeing how they work, I realized those posts go inside the tape, so just put the tape in without moving the posts.
2. and when you put the tape in, be sure the front flap of your VHSC tape pops all the way open. The first time I put in the tape I didn't push it all the way down, and the flap didn't even open at all. Don't force it, but when the tape engages the gear, the flap pops open. The gears are plastic, so fiddle with it, don't force it.
3. Now here is where you can break the tape; the instructions say "close the cover" which is right, but they don't mention that by closing the cover you are actually doing something else; the cover has a gear built into it, as the cover closes those two posts that are inside the tape push forward and out, spreading the tape out and pushing it to the front of the Adapater Cassette. This is how the tape is pulled out of your VHSC and held out so when the tape goes in the VCR it touches the VCR Head. When you slide the cover forward do it slowly, sort of back and forth, with light pressure. If you force it, it will snap your tape!
if you do all this, I think you'll find this adapater is excellent, and will save you a bunch of money over the other ones that are double price, but probably have better instructions.
20 of 22 found the following review helpful:
 Very low qualityNov 08, 2005
By Alex
I bought this adapter for my vhs-c tapes. When I check it I found that the adapter parts don't fit properly. I tried it just a few minuts I found that tape in adapter goes by diagonal. So in the play mode it damages one tape edge in the rewind mode it damages the other edge. I retuned it to store and bought the PV-P1 adapter from Panasonic. It worked fine.
14 of 15 found the following review helpful:
Check your tape before ordering!Apr 28, 2011
By MaryL.
If you are going to order this adapter, BE SURE you DO NOT have an 8mm cassette because this does NOT work with them. I stupidly ordered it without checking and cannot use it for the purpose that I originally bought it, but I can use it with a few others that I have so it wasn't a complete waste of time! :) It was my fault for not checking but I guess I needed it anyway! I got the package in mint condition and it works well for the right cassettes :)
13 of 14 found the following review helpful:
 JamsJun 27, 2009
By Richard D. King
"RKing"
Played a tape about 3/4 through and then stopped. When I rewound and removed it I also found that both tape edges were damaged. It's junk.
12 of 13 found the following review helpful:
GETS STUCK!Sep 23, 2007
By E. S. Perez
"WICKEDLIZ"
IT GETS STUCK IN MY VCR WHILE TRYING TO EJECT. I NEED TO USE A KNIFE ON EACH SIDE TO HELP IT OUT!
See all 93 customer reviews on Amazon.com
| | |
|
