| | |  | Speaker Stands | Home » » » » OmniMount ELO-B ELO Series Audiophile Speaker Stand | | | | | | | Description: | | Adjustable height from 26" to 36"Weight capacity: 4 lbs.Integrated cable management6mm tempered glass base with steel postIncludes 3 universal adapters | | | Features: | |
• Adjustable height from 26" to 36"
• Weight capacity: 4 lbs.
• Integrated cable management
• Black 6mm tempered glass base with black steel post
• Includes 3 universal adapters to accomodate most speakers
| | | Product Details: | | | Product Length:
| 10.0 inches | | Product Width:
| 11.0 inches | | Product Height:
| 36.0 inches | | Product Weight:
| 7.7 pounds | | Package Length:
| 25.3 inches | | Package Width:
| 12.3 inches | | Package Height:
| 1.5 inches | | Package Weight:
| 7.6 pounds | | Average Customer Rating:
|  based on 17 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 17 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
8 of 8 found the following review helpful:
 shoddy productDec 22, 2008
By J. Lethal
The bottom portion of the rods for these stands is threaded so they can be affixed to the base with a nut, washers and included wrench. Unfortunately the threaded part is not nearly long enough and firmly tightening the nut to secure the base and stand is impossible. Also the screw used to hold the stand in place after setting the desired height came so overtightened I couldn't loosen it and gave up to avoid stripping it. I have assembled many items before including other speaker stands and an entire home gym, and this marks the first time I ever had to return such an item. Do not buy.
5 of 5 found the following review helpful:
 A good looking stand for it's priceDec 12, 2009
By MN Joe
I bought two sets of these stands for my Front and Surround speakers. For the most part, I do like these stands.
What I like:
- Height Adjustable: I can adjust these to the proper height for my listening position.
- Stable: The stands have a rather large glass base that makes for a stable stand, even on carpet.
- Looks: For speaker stands, they look good at least in black. If you have small Front and Surround speakers like the Energy Take Classics they will look good on these stands.
Assembly: It was very easy to assemble. I had no problems with overtightened screws, or getting everything to tightly fit together.
What I didn't like:
- Cable Management: The product says that the cable management will allow up to 14 gauge wire, but my 14 gauge speaker wire from [...] doesn't fit.
- Speaker Mounting: I really wish that these had the speaker clamping mount some of the other speaker stands from Omnimount have. Instead you can either use direct screw mount (only some speakers can do this), use a angled bracket mount to screw your speaker to (basically an L shaped corner brace), or a small plate that use double sided sticky foam to adhere your speaker to. I didn't want to use the sticky foam on the finish of my speakers so I used the angled bracket. The problem is, the bracket isn't fully 90 degrees. My speakers actually point a bit downwards when mounted properly. I ended up reversing the bracket for my front speakers so that they point a bit up and mount them regularly but raise the height of my surrounds.
2 of 2 found the following review helpful:
 Perfect for ENERGY MICRO RCJan 09, 2012
By Aston Ward
I could not be happier with these speaker stands. I put them together in all of 3 minutes. Simple, easy to read directions. I am using the Energy Micro RC speakers and they are less than 2 pounds each. So these stands worked perfect for me. The only "issue" (not a big deal) was that I had to use the screws that came with the speakers to mount them on the stand. The screws that came with the stands were not long enough to mount the speakers. Besides that, these are perfect. Have a solid base, poles seem flimsy but they are actually sturdy. Love the glass base also. HIGHLY RECOMMEND.
1 of 1 found the following review helpful:
 OmniMount ELO-B Speaker StandsFeb 08, 2012
By Peter C. Vanlaw
"PtheVan"
The stands look good and were a good value for the price, but the speaker mountings needed some modification. Although three different types of mounting adapters were included, none fit my Polk speakers, which are bottom mounts. However, I was able to measure and drill one pair of the adapters to make them work for both speakers. Once the holes were drilled, it all went together quite easily. The only other complaints are that the adapters that worked are a bit spindly which makes it difficult to keep keep the speakers straight without at least one tipping slightly. And although the stands are adjustable, it's difficult to adjust them evenly, so that both speakers are the same height. I you have bottom mounting speakers but are handy with tools, then its a good deal. Otherwise you may need help,
1 of 1 found the following review helpful:
Does the job well, Good ValueMay 07, 2010
By Nicholas Burklow
Assembly was easy. I had no real issues other than the adhesive pad on one of the feet came off glue and all. I put a dab of gorilla glue on it and have had no issues. The adjustable stands are nice, the universal mounting hardware was easy to use, and the speaker wire is hidden inside the stand. The base is glass and does show dust, but whatever, its behind my couch where I don't see it. That may be an issue for others though. All in all its a good speaker stand for the price.
See all 17 customer reviews on Amazon.com
| | |
|
