| | |  | 2 - Tilt | Home » » » » Peerless ST670P Tilt Wall Mount for 42" to 71" Displays (Black) Non-security | | | | | | | Description: | | FOR 42" 71" FLAT PANEL SCREENSMOUNT TO 2 OR 3 WOOD STUDS CONCRETE CINDER BLOCK OR METAL STUDSUNIVERSAL MOUNTING PATTERN UP TO 19.8"H X 35.75"WSCRATCH-RESISTANT FUSED EPOXY1-TOUCH +15 /-5 ADJUSTABLE TILTINCRELOK SYSTEM ALLOWS TILT ANGLE TO BE LOCKED AT -5 0 5 10 OR 15 HOLDS UP TO 250 LBSJUNCTION BOX ACCESS PORTS ON WALL PLATEHORIZONTAL SCREEN ADJUSTMENT UP TO 8"UL LISTEDINCLUDES SORTED-FOR-YOU FASTENER PACK & ALL NECESSARY SCREEN-ATTACHMENT HARDWAREBLACKUPC : 735029242291Shipping Dimensions : 47.00in X 8.50in X 4.00inEstimated Shipping Weight : 15.8125 | | | Features: | |
• Weight capacity: 250 lbs.
• One-touch tilt adjustment of +15°/-5° without tools
• Optional horizontal adjustment of up to 6"
• Desired tilt angle can be locked in place if needed
• 18 5/8"W x 13 3/4"H x 2 7/8"D
| | | Product Details: | | | Product Length:
| 0.0 inches | | Product Width:
| 0.0 inches | | Product Height:
| 0.0 inches | | Product Weight:
| 12.57 pounds | | Package Length:
| 47.0 inches | | Package Width:
| 9.0 inches | | Package Height:
| 4.0 inches | | Package Weight:
| 15.0 pounds | | Average Customer Rating:
|  based on 31 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 31 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
15 of 15 found the following review helpful:
 Very sturdy and well engineeredApr 10, 2008
By J. Mulligan
I purchased this wall mount for a new Pioneer PDP-6010FD 60" plasma flat screen, and can highly recommend this mount. It is engineered and built with superior construction quality, easily holding my plasma TV weighing about 150 pounds (rated up to 250lbs). Mounting the universal bracket to the back of the plasma was extremely easy, just four bolts and washers (provided) that locked down, make for an extremely rigid mounting of the TV onto the bracket.
Since this mount covers televisions up to 71", it should work for most sets, as long as the maximum horizontal distance between the mounting holes is about 35" or less (check the product manual to get the exact maximum distance). The bracket's width and weight handling capacity requires that you mount it onto 3 wall studs, as it is approximately 40" wide. However, this actually helps you with mounting the bracket in a very level manner.
Here is a short narrative of how you go about mounting your TV using this wall mount. First, locate the center stud that will be used as the center mounting point, and use one of the provided lag bolts to mount the bracket on the wall at the desired location, using the topmost center hole on the wall bracket. Now mount your level on top of the bracket and using the installed center bolt as a pivot, rotate one side of the bracket or the other until your level indicates that the mount is perfectly level. Now using a marker pen, mark the two points to be drilled on the left and right outer studs, perfectly centered in the desired mounting holes. Drill the appropriate holes, then screw in the lag bolts, fixing the bracket into a perfectly level position. Now mark, drill for, and mount the remaining 3 bolts (there are six total, two at each end and two in the center mounting positions.)
The final step is to mount your TV onto the wall bracket and secure it. With help from a friend, securely grasp the TV and "hook" it onto the wall bracket. From underneath, reach behind with a standard or phillips head screw driver and secure the lock screw on the bottom of each bracket hook. This final step secures the TV to the wall mount.
I'll tell you, I live in the heart of earthquake county in SoCal, and I fully believe that my house will suffer damage well before this TV comes off the wall in a seismic event.
Overall, this wall mount is well worth every penny. Like always, Amazon comes through with a great product at a good price.
5 of 5 found the following review helpful:
Excellent valueJun 15, 2008
By John H. Gruver
"brainactiv"
Easy to install, fastens to three studs (16" centers), comes with a vast quantity of hardware, great instructions, and will hold just about any TV. I bet my 52" Samsung will still be on the wall when the only thing left are roaches! Well worth the few more dollars than the smaller mounts.
BTW: downstairs I used the Sanus VMDD26B Universal Articulating mount for my 52" Sony... in comparison, it costs 4-times as much, had less hardware, weighs 3-times as much, and the instructions are less-than-easy to follow... mostly pictograms with few words. It does allow more movement which I needed.
10 of 12 found the following review helpful:
 OK if you have to mount on three wall studsOct 04, 2008
By Philoguy
"David"
If you have a large, heavy plasma TV and you need to span three 18" centered wall studs, this is one of your very few choices in the $100-$200 range. It took ordering three different wall mounts before I found this one because the specs on Amazon (and other sites for that matter) are either confusing or flat-out wrong. Most of the time when they give you dimensions, it's the size of the carton that they give rather than the size of the mounting bracket itself. I even contacted a real person at Amazon for the info on my second try and she was just as wrong as I was the first time. Why it's so hard for a company to add a couple of inches to a wall bracket mystifies me, but there are hundreds of $100 mounts that go 30" and only one or two (like this one) that are longer. So, unless you want your $2000 TV dangling precariously 16" over from two studs in your wall, get one that spans more than 36" like this one. The major complaint I have on this particular unit is that the adjusting knob that is supposed to allow you to tilt the screen up or down a bit (handy for getting to cables and such after installation) is designed in such a way that the bracket's proximity to the wall prevents you from loosening it. So once you've got your behemoth screen in place, you're stuck with whatever angle you've set it at. Over all, though, it's a sturdy mount with one main problem, and if you're willing to live with that design flaw--go for it.
7 of 8 found the following review helpful:
Great Mount for a PlasmaJan 15, 2007
By Dean M. Miller
This was so easy to install. The end product looks great. I installed it over 3 wood studs and it held my full weight of 150 pounds with no problem. You will definitely need another person to lift the television onto the bracket. The tilt function works great and is so simple that you can change the tilt with one hand from the front of the television. There is a lot of different size bolts included for mounting all kinds of televisions.
I would definitely reccomend this to anyone looking for a simple effective mount for their plasma.
4 of 4 found the following review helpful:
Well Constructed Wall MountJan 20, 2009
By M. Luke
As an aerospace structural engineer I was gratified to open the box and find a well constructed sturdy wall mount. M8 bolts are over two inches long, and when properly installed, really connect well into the wooden studs behind my wall. Lots of capability in tension and shear. I used a stud finder to find the six locations to screw in the base plate. Yes, this design picks up three studs, rather than most other designs that pick up only two. Depending on your stud locations (you better check before purchasing...) that might be very important. I attached the two brackets to the fifty inch plasma set. I got my wife to help lift the set up and there it was, attached to the wall. The tilt adjustment comes in handy in my case where the set is located above the fireplace, in a fairly high position. I tilted the screen downward a bit and locked in the settings. It's a good product.
See all 31 customer reviews on Amazon.com
| | |
|
